Resources

You can check the signal of the infrared touch frame through the infrared configuration software, and you can judge whether the correct installation is based on the signal 1.Open the infrared configuration software 2. Click “Signal Testing” 3.If you get the following signal, it means that the signal is good, and there is no problem…

If the touch is not accurate, you can calibrate it with infrared configuration software 1.open the infrared configuration software.(Double click InfraRedTouch) 2. Click “Equipment Calibration” 3. Place your finger in the center of the cue point until it prompts the next point video of calibration the touch screen: